Cost save up to 10%

No chlorine emission

No equipment corrosion

>400
grades

Customized grade
developments on request

Price from
0.79 EUR

Application of TPE Masflex

MASFLEX 60112BLK9000U

Car carpets

MASFLEX 90112NAT9000U

MASFLEX 65312BLK9010U

MASFLEX 35111NAT9010U

Hardness: 35
Density, g/см3: 1,07-1,15
MFI, g/10 min: 5

Hardness, ед.: 60
Density, g/см3: 1,15-1,22
MFI, g/10 min: 10

Hardness, ед.: 65
Density, g/см3: 1,15-1,22
MFI, g/10 min: 5

Hardness, ед.: 90
Density, g/см3: 1,15-1,22
MFI, g/10 min: 10

MASFLEX 85210NAT9000

Shoes

MASFLEX 70210NAT9000F

MASFLEX 60210NAT9000

MASFLEX 70210NAT9000

hardness, ед.: 70
Density, g/см3: 1-1,07
MFI, g/10 min: 10

Hardness, ед.: 85
Density, g/см3: 1-1,07
MFI, g/10 min: 10

hardness, ед.: 60
Density, g/см3: 1-1,07
MFI, g/10 min: 10

Hardness, ед.: 70
Density, g/см3: 1-1,07
MFI, g/10 min: 10

Soft grade based on SEBS for extrusion and with high light resistance

Medium hardness based on SEBS rubber with the addition of SBS, for injection molding and with increased light resistance

Medium hardness based on SEBS rubber with the addition of SBS, for extrusion and with increased light resistance

With high hardness based on SEBS rubber, for injection molding and with increased light resistance

Medium Hardness Based on SBS Rubber, Wear Resistant, High Melt Injection Molding

High hardness based on SBS rubber, for injection molding with high melt flow

Medium hardness based on SBS rubber,
for injection molding with high melt flow

Medium hardness based on SBS rubber, for injection molding with high melt flow

MASFLEX 95112NAT9010U

Seals and hosepipes

MASFLEX 45D112NAT9010U

MASFLEX 65112NAT9019U

MASFLEX 60113NAT9010U

Hardness: 60
Density, g/см3 : 1,22-1,32
MFI, g/10 min : 5

Hardness : 95
Density, g/см3 : 1,15-1,22
MFI, g/10 min : 5

Hardness: 65
Density, g/см3 : 1,15-1,22
MFI, g/10 min : 5

Hardness : 45
Density, g/см3 : 1,15-1,22
MFI, g/10 min : 5

MASFLEX 60112NAT9010CAB

Cables

MASFLEX 70212NAT9010CABCu

MASFLEX 85212NAT9010

MASFLEX 70112NAT9010

Hardness : 70
Density, g/см3 : 1-1,07
MFI, g/10 min : 5

Hardness : 60
Density, g/см3 : 1-1,07
MFI, g/10 min : 5

Hardness : 85
Density, g/см3 : 1-1,07
MFI, g/10 min : 5

Hardness : 70
Density, g/см3 : 1-1,07
MFI, g/10 min : 5

Medium hardness based on SEBS rubber, for extrusion, resistant to UV radiation, designed to replace PVC compound

High hardness based on SEBS rubber, highly filled, extrusion resistant to UV radiation

Medium hardness based on SEBS rubber, for extrusion, resistant to UV radiation, designed to replace PVC compound

High hardness based on SEBS rubber, for extrusion, resistant to UV radiation

Medium hard based SEBS, extrusion resistant to UV radiation, designed to replace PVC compound

Medium hardness based on SEBS rubber, for extrusion, resistant to UV radiation, retains elasticity in frost (up to minus 50 degrees)

Extra hardness. Based on SBS rubber, for extrusion of cable insulation, designed to replace PVC compound

Medium hardness. Based on SBS rubber, for extrusion, resistant to UV radiation, retains elasticity in frost (up to minus 50 degrees)

MASFLEX 15109NAT9100

Medicine

MASFLEX 60109NAT9110

MASFLEX 45109NAT9100

Hardness : 45
Density, g/см3 : 1
MFI, g/10 min: : 10

Hardness : 15
Density, g/см3 : 1
MFI, g/10 min: : 5

Hardness : 60
Density, g/см3 : 1
MFI, g/10 min: : 5

Sanitary

MASFLEX 60113NAT9000

Hardness : 60
Density, g/см3 : 1,22-1,32
MFI, g/10 min: : 10

Soft grade unfilled, with low density, in medical oil, based on SEBS rubber, for injection molding

Very soft, in medical oil, based on SEBS rubber, for injection molding

Medium hardness, in medical oil, based on SEBS rubber, for extrusion and injection molding

Medium hardness. Based on SEBS rubber, for injection molding, designed to replace PVC compound

MASFLEX 80212NAT9000

Toys

MASFLEX 00209CLR9000

MASFLEX 35111NAT9000

MASFLEX 85112NAT9000

Hardness : 85
Density, g/см3 : 1,15-1,22
MFI, g/10 min: : 10

Hardness .: 80
Density, g/см3 : 1,15-1,22
MFI, g/10 min: : 10

Hardness : 35
Density, g/см3 : 1,07-1,15
MFI, g/10 min: : 10

Hardness : 0
Density, g/см3 : 1,15-1,22
MFI, g/10 min: : 10

MASFLEX 80212NAT9000

Sports equipment

MASFLEX 00209CLR9000

MASFLEX 35111NAT9000

MASFLEX 85112NAT9000

Hardness : 85
Density, g/см3 : 1-15-1,22
MFI, g/10 min: : 10

Hardness : 80
Density, g/см3 : 1,15-1,22
MFI, g/10 min: : 10

Hardness : 35
Density, g/см3 : 1,07-1,15
MFI, g/10 min: : 10

Hardness : 70
Density, g/см3 : 1-1,07
MFI, g/10 min: : 10

With increased hardness. Based on SEBS rubber, for injection molding, it can be colored in different colors.

With increased hardness based on SBS rubber, for injection molding, it can be colored in different colors.

SEBS soft rubber stamp, for injection molding, can be painted in various colors.

Very soft, unfilled, low-density, transparent, based on SBS rubber, for injection molding

With increased hardness based on SEBS rubber, for injection molding, it can be dyed in different colors using SKP for coloring polyolefins

With increased hardness based on SBS rubber, for injection molding, it can be dyed in different colors using SKP for coloring polystyrene

Based on SEBS stamp, for injection molding, can be painted in various colors using SKP for coloring polyolefins

Very soft, unfilled, low-density, transparent, based on SBS rubber, for injection molding

MASFLEX 60113GRY9000

Household goods

MASFLEX 60112BLK9010

MASFLEX 70112NAT9000

MASFLEX 55111NAT9000U

Hardness: 55
Density, g/см3 : 1,07-1,15
MFI, g/10 min : 10

Hardness : 60
Density, g/см3 : 1,22-1,32
MFI, g/10 min : 10

Hardness : 70
Density, g/см3 : 1,15-1,22
MFI, g/10 min : 10

Hardness : 60
Density, g/см3 : 1,15-1,22
MFI, g/10 min : 10

Kitchen tools

MASFLEX 60113NAT9000

Hardness : 60
Density, g/см3 : 1-22-1,32
MFI, g/10 min : 10

Medium hardness. Based on SEBS rubber, for injection molding and with increased light resistance

Medium hardness. Based on SEBS rubber, for injection molding

Medium hardness. Based on SEBS rubber, for injection molding

Medium hardness. Based on SEBS rubber, for extrusion and injection molding

Medium hardness. Based on SEBS rubber, for injection molding